Click or scroll to zoom
Tap or pinch to zoom
Click or scroll to zoom
Tap or pinch to zoom
Click or scroll to zoom
Tap or pinch to zoom
Click or scroll to zoom
Tap or pinch to zoom
Click or scroll to zoom
Tap or pinch to zoom
Click or scroll to zoom
Tap or pinch to zoom
Click or scroll to zoom
Tap or pinch to zoom
Click or scroll to zoom
Tap or pinch to zoom
Click or scroll to zoom
Tap or pinch to zoom
Click or scroll to zoom
Tap or pinch to zoom
Click or scroll to zoom
Tap or pinch to zoom
Click or scroll to zoom
Tap or pinch to zoom
Click or scroll to zoom
Tap or pinch to zoom
Click or scroll to zoom
Tap or pinch to zoom
Inkbird Digital Wi-Fi Humidity Controller IHC-200 Dual Outlet Pre-Wired Humidistat for Home Brewing, Fermentation, Breeding, Incubation, Greenhouse, Support Humidifier, Dehumidifier, Fan, iOS&Andriod
Remote Control: Connect the IHC-200 Wi-Fi humidity controller to 2.4GHz Wi-Fi, then you can monitor or adjust the humidity on your phone through the app at any time anywhere.
Dual Relay Output: Support both humidifying equipment and dehumidifying equipment. Voltage: 100-230Vac 50/60Hz, 10A. Maximum Power: 1200W(120Vac), 2200W(220Vac). Humidity measurement range: 10 ~ 99% RH. Relative humidity accuracy: ± 3% RH ~ ± 5% RH.
Plug-n-Play: No complicated installation required. Display the set humidity value and the measured humidity value at the same time with 2 screens. Support humidity calibration and dehumidification control delay protection.
High/Low Humidity Alarm: Set a High/Low Humidity Alarm, the controller will alarm to remind you if the humidity value exceeds the setting value, and it also alarm when a probe error occurs. Press any button to turn off the alarm sound or you can turn it off on your phone.
Notes:
Do not put probes or metal wire into fire.
Do not put probes into water, it may lead to inaccurate measurements.
Only support 2.4GHz Wi-Fi (Support IEEE 802.11b/g/n).
Specification
Package Contents
Remote Control: Connect the IHC-200 Wi-Fi humidity controller to 2.4GHz Wi-Fi, then you can monitor or adjust the humidity on your phone through the app at any time anywhere.
Dual Relay Output: Support both humidifying equipment and dehumidifying equipment. Voltage: 100-230Vac 50/60Hz, 10A. Maximum Power: 1200W(120Vac), 2200W(220Vac). Humidity measurement range: 10 ~ 99% RH. Relative humidity accuracy: ± 3% RH ~ ± 5% RH.
Plug-n-Play: No complicated installation required. Display the set humidity value and the measured humidity value at the same time with 2 screens. Support humidity calibration and dehumidification control delay protection.
High/Low Humidity Alarm: Set a High/Low Humidity Alarm, the controller will alarm to remind you if the humidity value exceeds the setting value, and it also alarm when a probe error occurs. Press any button to turn off the alarm sound or you can turn it off on your phone.
Notes:
Do not put probes or metal wire into fire.
Do not put probes into water, it may lead to inaccurate measurements.
Only support 2.4GHz Wi-Fi (Support IEEE 802.11b/g/n).
Specification
- Voltage: 100-230Vac 50/60Hz
- Current: 10A
- Maximum Power: 1200W(120Vac), 2200W(220Vac)
- Humidity Measurement Range: 10~99%RH
- Humidity Display Accuracy: 0.1%RH
- Relative Humidity Accuracy(10% to 95%RH): Typ: ±3%RH, Max: ±5%RH
- Display Unit: %RH
- Operating Ambient Temperature: -20℃~40℃/-4℉~104℉
- Storage Temperature: 0℃~60℃/32℉~140℉
- Storage Humidity: 20~80%RH(not frozen or dewed)
- Waterproof Grade: not waterproof
- Wireless Connection: Wi-Fi Connection.
- Controller Warranty: 2 years
- Probe Warranty: 1 year
Package Contents
- IHC-200-Wi-Fi Humidity Controller*1
- User’s Manual*1
- Warranty Card*1
